Lion Brand^® Fishermen's Wool^®

GAUGE:

Exact gauge is not essential to this project.

NOTES:

1. Four identical pieces are woven for Scarf. Each piece is woven using the same warp set up and each has the same number of rows.
2. Scarf is worked with 2 strands of yarn held together. Before beginning wind each skein into two balls.
3. Follow loom manual instructions on WEAVING for how to set up the warp, weave the weft, and remove weaving from the loom.
4. Warp is set up in stripes, following manual for warp set-up. 

Loom Configuration
Use the following pieces: (2) 36-hole pieces, (4) 12-hole pieces, (4) 6-hole pieces, (4) corner pieces.
Connect pieces to form a rectangle as follows: 36-hole piece > 12-hole piece > corner piece > 12-hole piece > 6-hole piece > 6-hole piece > corner piece > 12-hole piece > 36 hole piece > corner piece > 12-hole piece > 6-hole piece > 6-hole piece > corner piece.

Insert a small peg into every hole along each 6-hole piece, 12-hole piece, and 36-hole piece - 144 small pegs placed.
Insert three small pegs into each corner piece - 156 working pegs placed, 54 for warp and 102 for weft.
Insert one small contrast color peg into upper right corner to hold slip knot.

FIRST PIECE
Following Warp Set-up Diagram for color, set up the warp across the 27 pegs placed across each short end as follows:
*2 pegs with 2 strands of A, 1 peg with 2 strands of B, repeat from *
Weave the weft according to loom manual changing color as follows across the 51 pegs placed along the 2 long sides:
*2 rows with 2 strands of A, 1 row with 2 strands of B, repeat from *

SECOND - FOURTH PIECES:
Work same as First Piece.

Remove finished piece from loom.

FINISHING
Thread yarn needle provided with loom with yarn and sew Rectangles together along short ends to make Scarf. With same needle, weave yarn ends into the fabric of the Scarf.