Spread the warp by weaving about an inch with scrap yarn.
Weave 66 in. (167.5 cm) with C used at about 10 picks (passes of the shuttle) per inch. Note:The extra woven length is to allow for take up and shrinkage.
Leave 6 in. (15 cm) unwoven, then proceed directly to weaving Her Scarf.
Beginning 6 in. (15 cm) from the end of His Scarf, weave 6 picks of C, beating firmly.
Cut the yarn, leaving a 5 in. tail. Needle weave the ends under the last pick. It is easiest to do this in the neutral position.
Change the shed and insert the cardboard spacer. Change the shed again and weave 6 more picks as before, needleweaving in the tail.
Repeat to make a total of 28 spaced groups of 6 picks.
Remove the Scarves from the loom by untying the warp from the apron bar. Using a rotary cutter, and cutting against the metal ruler, cut the Scarves apart leaving a 4 1/2 in. (11.5 cm) fringe on His Scarf. Tie 4 strands together in an overhand knot across each end of each Scarf, ending with 1 bundle of 3. Using the rotary cutter or scissors trim fringe on His Scarf to 4 in. (10 cm), fringe on Her Scarf to about 1/2 in. (1.5 cm). Gently hand wash the Scarves.