Skip Navigation

Click for Lion Brand Yarn Home Page
separator
Our Yarns
The LB Collection
Martha Stewart Crafts
Request Free Catalog
Our Yarns
Yarn by Weight
separator
New Catalog
separator
Shop
separator
  • free patterns
  • special sales
  • new items
  • 15% off coupon
    US orders only
    view past newsletters   Click to view newsletters and subscription choice
separator
Free Catalog
separator
Patterns
separator
Lion Brand
     Yarn Studio
     Retail Store, New York, NY
separator
Lion Brand
     Yarn Shop
     Retail Store, Colonie, NY
separator
Lion Brand Outlet
     Retail Store, Carlstadt, NJ
separator
Find a Store
post code:
country:
within:
more options   Click for more store-locator options
Home : Learning Center : Learn to Knit
 

Library of Knitting and Crochet Information (FAQ)

We've assembled this on-line encyclopedia of knitting and crochet facts, abbreviations and instructions to help you find exactly the information that you need to make your project a success! You can probably immediately find the information you need by typing key words or phrases into the search box below.

Didn't find what you need? Want help?
If you don't find what you need, please click here and send your question so a human can help you!

 
 
Enter a keyword or phrase to search:  
spacer
 

CO = cast on

Add to Notes and Favs
Save
  ·   Send to a friend
Share
  ·   Pattern Help
Help
  ·   Print
Print
  ·  
Pin It

Casting On is the term for making the foundation row of stitches on your needle.

To begin, you will need a pair of knitting needles and a skein (also called a 'ball' or a 'hank') of yarn. The terms 'skein' , 'ball' and 'hank' refers to the form factor for the bulk yarn.

  1. A 'skein' is the form that the yarn is in when it wound by the manufacturing equipment. Some skeins are designed so that you can pull the yarn from the inside as well as the outside. These are called 'pull skeins.'
  2. A 'ball' is yarn that has been rolled into a ball (sometimes done by knitters for convenience or to divide a skein into multiple quantities for use)
  3. A 'hank' is the yarn wound loosely in a circle. Hanks are common in hand-spun or hand-dyed yarn, but are not common in commercially-prepared product. If your yarn is in a hank, it will tangle easily and it is advisable to roll it into a ball before beginning work.

In these instructions, we use the term 'ball' to describe the yarn in bulk, but the term 'skein' would be equally accurate -- we do not mean that you have to wind your skein into a ball!

Are you left handed?This tutorial teaches 'English-style' in which the yarn is held in and manipulated by the right hand. If you are left-handed and you find the method explained in this tutorial uncomfortable, you may want to:

  • look for a source where you can learn Continental-style knitting (in which the yarn is manipulated by the left hand rather than the right one) or
  • look for a source where you can learn mirror knitting (a process where the knitter executes a true inverse of the method explained in this tutorial and which does not require that the knitter reverse the pattern.)

Whatever you do, we advise against starting out with a method where you routinely have to rewrite the pattern instructions because this is a technique that beginners often find difficult.

There are many different methods of casting on. The method described in this tutorial is called the 'knitting cast-on. Other popular methods include

  1. the single-stitch cast-on,
  2. the long-tail cast-on,
  3. the cable cast-on,
  4. the double-knitted cast-on and
  5. the crochet edge cast-on.

We recommend learning the knitting cast-on as your first method because it is simple and leaves an edge that stretches well. After you become more expert, you may wish to find out more about the other methods.

We offer this tutorial in both written and video format.

Video Instruction: Casting On

Written Instruction: Casting On

  1. Working on a flat surface, begin by placing the ball of yarn to your left and holding the free end ('tail') of the yarn in your right hand. Make a very loose loop in the yarn about 5 or 6 inches (12 or 15 cm) from the free end of the yarn (the tail) by looping the yarn from the right to the left. The tail will be front and on top of the strand that comes from the ball of yarn. Then, pass the tail behind the strand, pulling the tail very gently to the right so that it passes behind the loop and the end of the yarn lies to the right of the loop and the ball of yarn:
    Illustration 1.  This picture shows the yarn looped so that the tail passes behind the strand
  2. Holding one needle in your right hand and moving your needle upwards over the bottom strand, slide the tip of the needle under the strand of yarn that comes from the tail, pick it up and pull it upwards through the loop. Gently pull the tail of the yarn with your right hand so that you tighten the yarn around the needle. This is your first stitch.
    Illustration 2. This picture shows the needle 'scooping' the yarn that is lying underneath the loop and bringing it up to the front to create the first stitch
  3. Put the needle with the loop on it in your left hand, grasping it between the thumb and forefinger of your left hand as you might hold a pencil for writing, but with the tip up. The yarn from your ball will be IN BACK and on the bottom of the left needle; the tail will be coming off the front on the bottom. Pick up and hold other needle in your right hand, as you would hold a pencil, but with the tip pointed up. Note: Knitting needles are deliberately slippery so that the yarn can slide easily on them while knitting; keeping the tips up keeps the yarn from sliding off when you don't want it to!
    Illustration 3.  This picture shows holding the needles with the tips up, the yarn to the left and the first stitch on the left needle.
  4. With a motion from front to back, insert the tip of your empty right needle into the loop on the left needle, underneath the left needle . The needles will cross inside the loop with the right needle under the left one.
     Ilustration 4.  This picture shows both needles in the stitch with the right needle underneath, going from the right to the left and forming an 'X'
  5. Adjust your thumb so that you are gently gripping both needles between the thumb and forefinger of your left hand. The right needle is still on the bottom.
     Illustration 5.  This picture shows both needles grasped in the left hand
  6. There are two strands of yarn hanging down from the stitch. One is the tail of the yarn and the other strand goes to the ball of yarn. You will be working with the strand that goes to the ball of yarn. Holding the yarn with your right hand and keeping the needles in your left, bring the strand of yarn underneath the right needle. Wrap the strand around the tip of the right needle, starting underneath from the right, going around the back to the left and bringing the yarn up over the needle to the right so that the yarn is wrapped in a clockwise motion (the direction that the hands on the clock move). The strand of yarn will be on your right when you have finished:
    Illustration 6.  This picture shows wrapping the yarn underneath the tip of the right needle in a clockwise direction and bringing it around the top of the right needle.
      
  7. Pull the yarn with your right pointer finger to tighten it so that it is not loose on the needle. Keeping the yarn wrapped on the right needle, pull the tip of the right needle towards you, out from below the left needle and up through the center of the stitch on the left needle. Then slide the tip of the right needle so that it is now on top of the left needle and the yarn that is wrapped around it has been pulled through the stitch that is on the left needle. When you are finished, the tips of your needles will be crossed with the tip of the right needle on top and the left one below. There is a loop on the right needle that has been pulled up through the stitch. Don't get discouraged if you don't get this on the first try! There is a 'knack' to moving the right needle and the loop on it so that the loop does not slide off when making this motion. This can take several tries before it becomes natural.

    Ilustration 7.  This picture shows pulling the yarn through with the right needle to make a new stitch 
  8. Now you have one loop on each needle with the right needle resting on top of the left needle. Elongate the pulled-through loop on the right needle by pulling it gently. This will soon be your second cast-on stitch!
    Illustration 8.  This picture shows pulling the stitch with the right needle so that it is the same size as that on the left needle. 
  9. Transfer the new cast-on stitch from the right needle to the left needle by inserting the tip of the left needle into the loop of the stitch that you have just created on the right needle and slipping the stitch from the right needle to the left needle.
    Ilustration 9.  This picture shows the act of sliding the new stitch from the right needle to the left one 
  10. You now have 2 loops ('cast-on stitches') on your left needle!

Illustration 10.  This picture shows two cast-on stitches on the left needle

Repeat steps 4 through 9 until you have the desired number of stitches on the left needle. When you have as many stitches on the needle as are required by your pattern, your cast-on is complete!

Long Tail Cast-On

For an alternate way to cast on stitches, see this video for the popular long tail cast-on.

Now get ready to knit!

Download all Instructions Next Topic >>

 
 
separator separator
Bookmark This!  separator
Sign up for our Newsletter  
separator Share This!  separator About Us separator Contact Us separator
  Font Size:   
Click to view page with standard font Click to view page with larger font Click to view page with largest font