Welcome the New Season With Up to 70% Off Yarn. Shop & Save Now!

Author Archives: Laura Yona

  • Caring for Your Handmade Items

    You've just spent hours crafting a gorgeous sweater (or afghan, or shawl, or scarf...honestly, this article applies to any type of project!) and now you need to know what to do when it needs to be cleaned. We've all heard horror stories about washing machines eating afghans, and sweaters shrunk in dryers, and it makes the prospect of caring for things we slaved over rather daunting, to say the least. I'll do my best in the next few paragraphs to try to alleviate those fears for you.

    Read the Label

    The first thing to consider is the yarn you used. The label (or the yarn's page on our website if you've misplaced the label) will give you a bunch of information about whether the yarn can be thrown in the washer and dryer, taken to the dry cleaner, steamed, etc.

    Not sure what all those symbols mean? We've provided a handy key for you in our FAQ. Remember, the information on the yarn's label applies to the yarn itself, not necessarily your project. In other words, just because the yarn you've used will not be damaged by machine washing doesn't mean that's the best way to care for your item.

    Acrylic or 100% Wool?

    Once you've checked out the label and seen all the ways you can safely wash the yarn, it's time to think about the item itself. Is this a baby sweater? An extra large man's sweater? An afghan? A very lacy shawl? A scarf with a fringe?

    Something like a baby sweater, if it is made with a machine-washable and -dryable yarn, can be pretty safely tossed in the machine with no problems (though, as noted in the paragraph below, it will continue to look newer and fresher if it can be cared for more gently). The rest of the items I listed? Not so much. The fringed scarf is going to tangle itself up in all that loose yarn, and all the agitation can be very damaging to the fringe. Your larger sweaters, afghans, and lacy items, are going to get very heavy when they are wet, and the action of the washing machine and dryer will cause the weight of the item to pull on itself, stretching those items out of shape, in some cases quite severely. This can be somewhat alleviated by using a sweater bag with those larger items, as it will keep the item from having room to stretch out.

    Making It Last for Years to Come

    Finally, think about your expectations for the item. Is this an afghan you expect your rowdy family of five to snuggle up under on the couch every night and the cat to sleep on all day? You probably don't expect it to look perfect forever, and a little pilling and stretching is going to be par for the course, so throwing it in the machine (in a sweater bag!) is just fine.

    Is this a beautiful cabled cardigan you hope to wear for years and years? You're probably hoping it will continue to look just-off-the-needles for a good long time. As with any delicate item -- whether handmade or store-bought -- the more gently you care for it the longer it will last and be beautiful. 


    Hand-washing and laying flat to dry is almost always the gentlest way to care for a handmade item to ensure the best results over time. It's inconvenient, sure, but isn't it worth a little inconvenience to keep the project that took so many hours to make looking and feeling great?

    There are more great tips on exactly how to handle your project as you wash it in this article.

    Tagged In: Read More
  • Tips & Tricks for Reversing Shaping

    It is common practice in cardigan patterns to write out shaping for only one front and then indicate that the knitter or crocheter is to "reverse shaping" for the second front. The practice developed because in print, leaving out those instructions means that there is room for something else (like an additional pattern or a more extensive explanation of a stitch pattern or another picture of the garment) and leaves less room for error (in terms of conflicting information or directions). Some people are bothered by this , but I actually really like that it gives me a chance to see what the structure of the garment is rather than just blindly following along with the pattern. Regardless, there are really only two ways to efficiently and effectively reverse shaping, and which method is appropriate will depend on the particular pattern.

    The simplest way to reverse shaping is to simply shift all the shaping a single row. So if you were originally working the shaping on the RS rows, for the other front you will work it on the WS rows. For example, "Row 1: k24, k2tog; Row 2: p across" would simply become: "Row 1: k across; Row 2: p24, p2tog". Note that the stitches and decreases are worked in the same order using this method--all you're doing is shifting rows. (Crocheters, this is the same for you--just substitute, for instance, "sc" instead of "k" and "p".) You'll end up with an extra row on one side or the other, but unless you are working at an exceptionally large gauge, this won't make a difference once you've got the sweater put together.

    The more complicated method involves actually reversing the rows. In the example above, you would still have "Row 1: k24, k2tog; Row 2: p across" for your first front, but then for the second front you would  work ""Row 1: k2tog, k24; Row 2: p across". This method is most useful when you're doing something that involves a lot of patterning, where shifting the decreases would result in a noticeable difference or in the situation noted above, when you're working at an exceptionally large gauge. If you're going to follow this method, I strongly recommend that you actually write out each shaping row reversed before you start working.

    A couple of other things to think about: Remember that if you are working in a reversible stitch pattern, like garter or seed stitch, there is no need to actually reverse the shaping. Just make two fronts exactly the same and flip one over! Also, if you're finding something confusing or something doesn't seem right, take a moment to sit and think about it...often there will be a common sense, logical answer that will straighten everything out. For instance, if you've bound off for the armhole at one edge and now you're finding that what should be the neck decreases are also on that edge, something has obviously gone wrong and you need to take a moment to go back and review what's going on with your work. Usually a quick check against the original shaping instructions will get you back on track, and you'll be well on your way to have two mirror-image fronts for your cardigan.

    Tagged In: Read More
  • Tips for Working on Both Shoulders at the Same Time

    One of the toughest things about making sweaters is figuring out the construction and shaping. Unlike a blanket or scarf, it's not just a matter of casting on, working for a certain number of inches and binding off. There are angles and curves to be considered There is a somewhat perplexing instruction that is very common in pullover patterns, wherein you work some stitches, join a new ball of yarn, bind off some stitches, and work to the end of the row. Now you've got two balls of yarn going--one for each shoulder--and you need to work both shoulders at once to make sure they come out even. It's one of those things that's a little confusing when you read it, but when you start working it you'll find that it goes pretty smoothly.

    Here's a breakdown of the steps:

    Work across the indicated number of stitches with the first ball. Add the new ball in the same way you would when you run out and add a new ball (work the first stitch, leaving a long tail you will weave in later). Bind off the indicated stitches and then work across the remaining stitches with the second ball.

    You now have two balls of yarn attached, one on each side of the neck.

    Now you will work both sides at the same time, ensuring you have the same number of rows. Work across the row with the yarn on that side to the end of that section. Drop the yarn. Pick up the other ball and complete the row on the other side of the neck. And you just continue on like this for the indicated number of rows or inches, working any decreases that might be indicated as well.

    You do need to be careful of a couple of things when you're doing this. First, you need to make sure you don't put the work down after working one shoulder but before working the other, because it's hard to tell when you pick it up again which shoulder you ended on. If you absolutely must put it down, work at least the first couple of stitches on the next shoulder so you can be sure to start off in the right direction.

    You also want to remember a couple of things when you're binding off: First, be sure not to bind off the last stitch of the first shoulder. To start the bind off, knit two and slip the first stitch over the second stitch -- don't knit one and slip the last stitch worked for the first shoulder over at. Conversely, when you get to the other shoulder, you use the first stitch of the shoulder to bind off the last stitch. So you'll work the last stitch to be bound off, then the first stitch of the second shoulder, and slip the last bound off stitch over the first shoulder stitch. Now that first shoulder stitch will be already worked and on your right needle -- just keep working across from there.

    Finally, any decreases that you may need to do will usually just say something like "at each neck edge". That will be at the end of the first shoulder worked across and at the beginning of the second shoulder worked across -- the edge of each shoulder closest to that bound off section. The "armhole edge" on the other hand will be the edge furthest from that bound off section -- the beginning of the first shoulder worked and the end of the second shoulder.

    As I said before, this is one of those things that seems like it's going to be really confusing when you're reading through the instructions, but once you sit down and get started, it will all fall into place.

    Tagged In: Read More
  1. 1
  2. 2
  3. 3
  4. Previous
  5. ...